We understand you are manufacturing Talc. We require Talc for manufacturing of Polyester Putty, therefore, kindly send us your most competitive quotation for the filler under reference CIF Delhi, as per the specifications attached. Thanking & looking forward to hear. PS: We are also interested to import filler ¨C Calcium Carbonate, Barium Sulphate & Dolomite for the same application as stated above. Please send your quotation for these three fillers as well. Attachment: (A) Talcum Powder Liaoning No.2 Origin: China Specifications: SiO2: 35% MgO: 30% Fe2O3: 1%Max. Lead(as Pb): 10ppm Max. Whiteness: 83% Min. Oil Absorption: 30ml/100gms Loss on Ignition: 5% Max. Bulk Density: 0.50g/cm3 Max. Fineness: 95% Min. passing through 325 mesh (48 microns) Packing: in 5 ply kraft paper bags with marking as 35 (B) Barium Sulphate: Specifications: Barium Sulphate: 98.3% Volatile Matters on 105degC: 0.12% Water insoluble matter: 0.19% Fe: 0.001% Whiteness: 96.4% Oil Absorption: (g/100g) 15.2 Fineness: (45um) 0.08% Size: (< 10um) 98.6% (< 15um) 96.8% (< 10um) 91.8% ( C) CaCO3 grade : Finess: d(0.97) 22 microns d(0.5) 4 microns Typical Properties: Oil Absorption (ISO 787/5)- g/100g 20 pH value (ISO 787/5) 9 Specific gravity--g/cm3 2.7 Tamped density (ISO 787/11)--g/cm3 1.4 Chemical Analysis: (9) CaCO3---% 99.7 (10) MgO--% 0.000 (11) Fe2O3---% 0.020 (D) Dolomite with good Whiteness, Low Oil Absorption, V. Low Fe content & Fine powder.