Hello, We are in the final stages of establishing used motor oil recycling Plant here in the USA. Our research shows that your esteem organization design & fabricate used oil refinery plant. According to our planning we have to design a continuous process plant production capacity, 1600 liters/hr. Used Motor Oil Analysis is given below, Color: Black Flash Point: 183 degrees C Viscosity at 40 degrees C: 52.5 cSt Viscosity at 100 degrees C: 8.65 cSt Viscosity Index: 143 Total acid number: 1.52 mg KOH / gm Ash Content: 0.66 g / 100g Pour Point: -33 C Density at 15 degrees C: 0.89 kg /dm^3 Sulphur Content: 0.75 % ~ 5 % Water ~ 5 - 15% light ends [gasoline, aromatics] ~ 5 - 15% Diesel, Kerosene ~ 10 - 80% long-chain hydrocarbons ~ 5 – 30% residual solids and Asphaltenes. I would like to mention that in USA acid clay treatment has been banned only solvent extraction or catalytic hydrotreatment processes are allowed. Please confirm that re-refined lube oil made from your process will meet ASTM Standards and also let us know budgetary numbers for a turnkey project. We are expecting a prompt response so that we can proceed quickly. Looking forward for reply, Thanks, We remain, with best regards, Mike, CEO NMR Energy 2205 Pyka Road Sealy, Texas 77474 USA Ph# (979) 627-0773 Fax# (979) 885-6467 Cell#(832) 545-0040,(832) 279-0376